Sensors Optimized for Sure Cross® FlexPower® Devices

The following sensors are optimized to work with Banner's Sure Cross FlexPower industrial wireless I/O radio devices. These sensors have minimized power requirements to prolong battery life, but other sensors can be used with the Sure Cross devices. Additional sensor options are available. For more information, refer to Banner's Power Solutions document. For more information about battery life and the power requirements of your specific application, contact a Banner wireless applications engineer.

M-GAGE Sensors

The M-GAGE sensor uses a passive sensing technology to detect large ferrous objects. The sensor measures the change in the Earth's natural magnetic field (ambient magnetic field) caused by the introduction of a ferromagnetic object. The M-GAGE provides a direct replacement for inductive loop systems and needs no external frequency box. Its unique design allows quick installation within a core hole. These M-GAGE sensors are powered by an on-board battery pack integrated into the fully sealed housing

	Models	Notes	Datasheet
	MultiHop M-GAGE Sensor	Powered by A cell batteries integrated into the housing	158148
	DX80 M-GAGE Sensor		157693
	DX80 M-GAGE Sensor	Powered by a D cell battery integrated into the housing	180451

Temperature and Relative Humidity Sensors

	Models	Notes	Datasheet
	Temperature and Humidity Sensor Model M12FTH4Q Temperature Sensor Model M12FT4Q	1-Wire Serial Interface, designed to work with the Performance Node with Serial Interface (P6) and MultiHop M-H6 models.	Datasheet: 162669 Quick Start Guide: 173557 NIST Traceabiliy Calibration Certificate
	Temperature and Humidity Sensor Model: M12FTH3Q Temperature Sensor Model: M12FT3Q	Modbus Slave	Datasheet: 163751 NIST Traceabiliy Calibration Certificate
	FTH-FIL-001	Aluminum grill filter cap (included with M12FTH*Q)
	FTH-FIL-002	Stainless steel filter, sintered to 10 micrometer porosity
	BWA-THERMISTOR-001	NTC Thermistor, 2 KOhms, +/-0.2%C, blue bead (For models: DX80N9X2S2N2T/C, DX99N9X2S2N0T4X0A0, and DX99N9X1S2N0T4X0D0)
	BWA-THERMISTOR-002	NTC Thermistor, 10 KOhms, +/-0.2%C, black bead (For Performance models P1/C/E, and MultiHop models M-H1/C/E) (2 pack)

Photoelectric Sensors

	Models	Notes	Datasheet
	QS30 WORLD-BEAM Models QS30WEQ (Emitter) and QS30WRQ (Receiver)	Photoelectric pair for a maximum range of 100 feet. 1-Wire Serial Interface, designed to work with the Performance Node with Serial Interface (P6) model.	140987
	MINI-BEAM® SM312LPQD-78447 (3 m range) SM312DQD-78419 (38 cm range)	The low power MINI-BEAM is designed to work with the FlexPower Nodes.	134420

Ultrasonic Sensors

	Models	Notes	Datasheet
	U-GAGE QT50U	A long-range ultrasonic sensor designed to work with the FlexPower Nodes.	datasheet 70137 Addendum 126504

Other Sensors

These sensors also work well with Banner's Sure Cross devices, but are not manufactured by Banner Engineering Corp.