ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('156661_SW','2011-04-06T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1503=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1504=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1505=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#1504);
#1506=(CONVERSION_BASED_UNIT('INCH',#1505)LENGTH_UNIT()NAMED_UNIT(#1503));
#1507=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1508=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1509=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #1508);
#1510=(CONVERSION_BASED_UNIT('DEGREE',#1509)NAMED_UNIT(#1507)PLANE_ANGLE_UNIT( ));
#1511=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1512=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.033013416134E-4),#1506, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#1513=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #1512))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1506,#1510,#1511))REPRESENTATION_CONTEXT( 'ID1','3'));
#1515=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#1516=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#1515);
#1517=DESIGN_CONTEXT('',#1515,'design');
#1518=MECHANICAL_CONTEXT('',#1515,'mechanical');
#1519=PRODUCT('156661_SW','156661_SW','NOT SPECIFIED',(#1518));
#1520=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #1519,.MADE.);
#1524=PRODUCT_CATEGORY('part','');
#1525=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#1519));
#1521=PRODUCT_DEFINITION('design','',#1520,#1517);
#1522=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 156661_SW.',#1521);
ENDSEC;
END-ISO-10303-21;