ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('146046_SW','2009-05-19T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1272=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1273=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1274=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#1273);
#1275=(CONVERSION_BASED_UNIT('INCH',#1274)LENGTH_UNIT()NAMED_UNIT(#1272));
#1276=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1277=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1278=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #1277);
#1279=(CONVERSION_BASED_UNIT('DEGREE',#1278)NAMED_UNIT(#1276)PLANE_ANGLE_UNIT( ));
#1280=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1281=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.713892621966E-5),#1275, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#1282=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #1281))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1275,#1279,#1280))REPRESENTATION_CONTEXT( 'ID1','3'));
#1284=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#1285=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#1284);
#1286=DESIGN_CONTEXT('',#1284,'design');
#1287=MECHANICAL_CONTEXT('',#1284,'mechanical');
#1288=PRODUCT('146046_SW','146046_SW','NOT SPECIFIED',(#1287));
#1289=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #1288,.MADE.);
#1293=PRODUCT_CATEGORY('part','');
#1294=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#1288));
#1290=PRODUCT_DEFINITION('design','',#1289,#1286);
#1291=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 146046_SW.',#1290);
ENDSEC;
END-ISO-10303-21;