ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('156714_SW','2012-01-24T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#51349=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#51350=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#51351=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#51350);
#51352=(CONVERSION_BASED_UNIT('INCH',#51351)LENGTH_UNIT()NAMED_UNIT(#51349));
#51353=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#51354=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#51355=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #51354);
#51356=(CONVERSION_BASED_UNIT('DEGREE',#51355)NAMED_UNIT(#51353)PLANE_ANGLE_UNIT());
#51357=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#51358=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.684328585274E-4),#51352, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#51359=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #51358))GLOBAL_UNIT_ASSIGNED_CONTEXT((#51352,#51356,#51357))REPRESENTATION_CONTEXT('ID1','3'));
#51361=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#51362=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#51361);
#51363=DESIGN_CONTEXT('',#51361,'design');
#51364=MECHANICAL_CONTEXT('',#51361,'mechanical');
#51365=PRODUCT('156714_SW','156714_SW','NOT SPECIFIED',(#51364));
#51366=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #51365,.MADE.);
#51370=PRODUCT_CATEGORY('part','');
#51371=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#51365));
#51367=PRODUCT_DEFINITION('design','',#51366,#51363);
#51368=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 156714_SW.',#51367);
ENDSEC;
END-ISO-10303-21;