ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('156690_SW','2011-02-09T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#34204=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#34205=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#34206=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#34205);
#34207=(CONVERSION_BASED_UNIT('INCH',#34206)LENGTH_UNIT()NAMED_UNIT(#34204));
#34208=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#34209=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#34210=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #34209);
#34211=(CONVERSION_BASED_UNIT('DEGREE',#34210)NAMED_UNIT(#34208)PLANE_ANGLE_UNIT());
#34212=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#34213=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.855923310204E-4),#34207, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#34214=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #34213))GLOBAL_UNIT_ASSIGNED_CONTEXT((#34207,#34211,#34212))REPRESENTATION_CONTEXT('ID1','3'));
#34216=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#34217=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#34216);
#34218=DESIGN_CONTEXT('',#34216,'design');
#34219=MECHANICAL_CONTEXT('',#34216,'mechanical');
#34220=PRODUCT('156690_SW','156690_SW','NOT SPECIFIED',(#34219));
#34221=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #34220,.MADE.);
#34225=PRODUCT_CATEGORY('part','');
#34226=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#34220));
#34222=PRODUCT_DEFINITION('design','',#34221,#34218);
#34223=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 156690_SW.',#34222);
ENDSEC;
END-ISO-10303-21;