ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('152824_SW','2010-06-07T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2009141','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#53878=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#53879=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#53880=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#53879);
#53881=(CONVERSION_BASED_UNIT('INCH',#53880)LENGTH_UNIT()NAMED_UNIT(#53878));
#53882=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#53883=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#53884=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #53883);
#53885=(CONVERSION_BASED_UNIT('DEGREE',#53884)NAMED_UNIT(#53882)PLANE_ANGLE_UNIT());
#53886=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#53887=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(6.341813769922E-5),#53881, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#53888=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #53887))GLOBAL_UNIT_ASSIGNED_CONTEXT((#53881,#53885,#53886))REPRESENTATION_CONTEXT('ID1','3'));
#53890=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#53891=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#53890);
#53892=DESIGN_CONTEXT('',#53890,'design');
#53893=MECHANICAL_CONTEXT('',#53890,'mechanical');
#53894=PRODUCT('152824_SW','152824_SW','NOT SPECIFIED',(#53893));
#53895=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #53894,.MADE.);
#53899=PRODUCT_CATEGORY('part','');
#53900=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#53894));
#53896=PRODUCT_DEFINITION('design','',#53895,#53892);
#53897=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 152824_SW.',#53896);
ENDSEC;
END-ISO-10303-21;