ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('139709_SW','2008-05-07T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#33468=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#33469=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#33470=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#33469);
#33471=(CONVERSION_BASED_UNIT('INCH',#33470)LENGTH_UNIT()NAMED_UNIT(#33468));
#33472=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#33473=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#33474=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #33473);
#33475=(CONVERSION_BASED_UNIT('DEGREE',#33474)NAMED_UNIT(#33472)PLANE_ANGLE_UNIT());
#33476=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#33477=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.537108981101E-5),#33471, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#33478=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #33477))GLOBAL_UNIT_ASSIGNED_CONTEXT((#33471,#33475,#33476))REPRESENTATION_CONTEXT('ID1','3'));
#33480=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#33481=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#33480);
#33482=DESIGN_CONTEXT('',#33480,'design');
#33483=MECHANICAL_CONTEXT('',#33480,'mechanical');
#33484=PRODUCT('139709_SW','139709_SW','NOT SPECIFIED',(#33483));
#33485=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #33484,.MADE.);
#33489=PRODUCT_CATEGORY('part','');
#33490=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#33484));
#33486=PRODUCT_DEFINITION('design','',#33485,#33482);
#33487=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 139709_SW.',#33486);
ENDSEC;
END-ISO-10303-21;