ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('139443_SW','2008-05-05T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#33969=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#33970=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#33971=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#33970);
#33972=(CONVERSION_BASED_UNIT('INCH',#33971)LENGTH_UNIT()NAMED_UNIT(#33969));
#33973=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#33974=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#33975=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #33974);
#33976=(CONVERSION_BASED_UNIT('DEGREE',#33975)NAMED_UNIT(#33973)PLANE_ANGLE_UNIT());
#33977=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#33978=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.944980289727E-5),#33972, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#33979=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #33978))GLOBAL_UNIT_ASSIGNED_CONTEXT((#33972,#33976,#33977))REPRESENTATION_CONTEXT('ID1','3'));
#33981=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#33982=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#33981);
#33983=DESIGN_CONTEXT('',#33981,'design');
#33984=MECHANICAL_CONTEXT('',#33981,'mechanical');
#33985=PRODUCT('139443_SW','139443_SW','NOT SPECIFIED',(#33984));
#33986=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #33985,.MADE.);
#33990=PRODUCT_CATEGORY('part','');
#33991=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#33985));
#33987=PRODUCT_DEFINITION('design','',#33986,#33983);
#33988=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 139443_SW.',#33987);
ENDSEC;
END-ISO-10303-21;