ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('139442_SW','2008-04-04T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#32331=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#32332=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#32333=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#32332);
#32334=(CONVERSION_BASED_UNIT('INCH',#32333)LENGTH_UNIT()NAMED_UNIT(#32331));
#32335=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#32336=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#32337=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #32336);
#32338=(CONVERSION_BASED_UNIT('DEGREE',#32337)NAMED_UNIT(#32335)PLANE_ANGLE_UNIT());
#32339=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#32340=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.938142510926E-5),#32334, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#32341=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #32340))GLOBAL_UNIT_ASSIGNED_CONTEXT((#32334,#32338,#32339))REPRESENTATION_CONTEXT('ID1','3'));
#32343=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#32344=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#32343);
#32345=DESIGN_CONTEXT('',#32343,'design');
#32346=MECHANICAL_CONTEXT('',#32343,'mechanical');
#32347=PRODUCT('139442_SW','139442_SW','NOT SPECIFIED',(#32346));
#32348=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #32347,.MADE.);
#32352=PRODUCT_CATEGORY('part','');
#32353=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#32347));
#32349=PRODUCT_DEFINITION('design','',#32348,#32345);
#32350=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 139442_SW.',#32349);
ENDSEC;
END-ISO-10303-21;