ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('137653_SW','2007-12-26T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#36582=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#36583=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#36584=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#36583);
#36585=(CONVERSION_BASED_UNIT('INCH',#36584)LENGTH_UNIT()NAMED_UNIT(#36582));
#36586=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#36587=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#36588=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #36587);
#36589=(CONVERSION_BASED_UNIT('DEGREE',#36588)NAMED_UNIT(#36586)PLANE_ANGLE_UNIT());
#36590=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#36591=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.537108981101E-5),#36585, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#36592=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #36591))GLOBAL_UNIT_ASSIGNED_CONTEXT((#36585,#36589,#36590))REPRESENTATION_CONTEXT('ID1','3'));
#36594=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#36595=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#36594);
#36596=DESIGN_CONTEXT('',#36594,'design');
#36597=MECHANICAL_CONTEXT('',#36594,'mechanical');
#36598=PRODUCT('137653_SW','137653_SW','NOT SPECIFIED',(#36597));
#36599=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #36598,.MADE.);
#36603=PRODUCT_CATEGORY('part','');
#36604=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#36598));
#36600=PRODUCT_DEFINITION('design','',#36599,#36596);
#36601=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 137653_SW.',#36600);
ENDSEC;
END-ISO-10303-21;