ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('137348_SW','2008-05-16T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#66222=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#66223=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#66224=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#66223);
#66225=(CONVERSION_BASED_UNIT('INCH',#66224)LENGTH_UNIT()NAMED_UNIT(#66222));
#66226=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#66227=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#66228=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #66227);
#66229=(CONVERSION_BASED_UNIT('DEGREE',#66228)NAMED_UNIT(#66226)PLANE_ANGLE_UNIT());
#66230=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#66231=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.353896448604E-4),#66225, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#66232=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #66231))GLOBAL_UNIT_ASSIGNED_CONTEXT((#66225,#66229,#66230))REPRESENTATION_CONTEXT('ID1','3'));
#66234=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#66235=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#66234);
#66236=DESIGN_CONTEXT('',#66234,'design');
#66237=MECHANICAL_CONTEXT('',#66234,'mechanical');
#66238=PRODUCT('137348_SW','137348_SW','NOT SPECIFIED',(#66237));
#66239=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #66238,.MADE.);
#66243=PRODUCT_CATEGORY('part','');
#66244=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#66238));
#66240=PRODUCT_DEFINITION('design','',#66239,#66236);
#66241=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 137348_SW.',#66240);
ENDSEC;
END-ISO-10303-21;