ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('137346_SW','2008-05-16T',(''),('BANNER ENGINEERING'), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2006170','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#66849=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#66850=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#66851=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#66850);
#66852=(CONVERSION_BASED_UNIT('INCH',#66851)LENGTH_UNIT()NAMED_UNIT(#66849));
#66853=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#66854=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#66855=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #66854);
#66856=(CONVERSION_BASED_UNIT('DEGREE',#66855)NAMED_UNIT(#66853)PLANE_ANGLE_UNIT());
#66857=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#66858=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.353896448604E-4),#66852, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#66859=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #66858))GLOBAL_UNIT_ASSIGNED_CONTEXT((#66852,#66856,#66857))REPRESENTATION_CONTEXT('ID1','3'));
#66861=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#66862=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#66861);
#66863=DESIGN_CONTEXT('',#66861,'design');
#66864=MECHANICAL_CONTEXT('',#66861,'mechanical');
#66865=PRODUCT('137346_SW','137346_SW','NOT SPECIFIED',(#66864));
#66866=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #66865,.MADE.);
#66870=PRODUCT_CATEGORY('part','');
#66871=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#66865));
#66867=PRODUCT_DEFINITION('design','',#66866,#66863);
#66868=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 137346_SW.',#66867);
ENDSEC;
END-ISO-10303-21;