Readme.txt The PresencePLUS Software is compatible with Windows ME, NT, 2000, and Windows XP platforms. This READ ME file contains information on the following topics: - Version Information Update. - System Requirements. - What's new in PresencePLUS Software version 2006R4C - Install PresencePLUS PC Software. - Update PresencePLUS Sensor Firmware. - Banner Contact Information. ******************************************************************************************** VERSION INFORMATION UPDATE This PresencePLUS Software version 2006R4C contains: - PresencePLUS PC Software version 2.10.1 - Pro firmware version 1.6.0 - ProII firmware version 1.0.2 - ProII BCR version 1.0.2 - P4 AREA firmware version 1.4.0 - P4 AREA 1.3 firmware version 1.4.0 - P4 BCR firmware version 1.4.0 - P4 BCR 1.3 firmware version 1.1.0 - P4 EDGE firmware version 1.4.0 - P4 EDGE 1.3 firmware version 1.4.0 - P4 GEO firmware version 1.5.0 - P4 GEO 1.3 firmware version 1.5.0 - P4 OMNI firmware version 1.3.0 - P4 OMNI 1.3 firmware version 1.1.1 - P4 OMNI(BCR) firmware version 1.1.0 - P4 OMNI(BCR) 1.3 firmware version 1.1.1 ............................................................................................... SYSTEM REQUIREMENTS: - Pentium II Microprocessor or higher running Windows ME, NT, 2000, or XP. - Requires Administrator rights when run PresencePLUS installation on Windows NT, 2000 or XP. - Hard disk requirements: * Typical installation requires 25 megabytes of free disk space. * Compact installation requires 10 megabytes of free disk space. - Minimum video display resolution setting is 1024-768 at 256 color. - 16 Megabytes of RAM (excluding amount of RAM required by operating system and other applications). - Either an available serial communication port or an Ethernet port with PresencePLUS sensor connected to when running application, - Winsock 2 installed on the PC. - TCP\IP installed if you plan to communicate with PresencePLUS through Ethernet card - Internet Explorer 5.0 or higher installed. - Acrobat Reader (version 4.0 or higher) installed in order to view help files. ............................................................................................. What's new in PresencePLUS Software version 2006R4C : Updated P4 OMNI 1.3, P4 OMNI(BCR) 1.3, ProII, and ProII BCR firmware to support new flash memory. Fig GUI tools name problem when re-save PresencePLUS Pro inspection created with firmware verion 1.2.2 and older PresencePLUS PC SOFTWARE to Sensor Firmware Compatibility Matrix Sensor Firmware PresencePLUS PC SOFTWARE Model Version Version ----------------------------------------------------------------------------------------------- Pro 1.2.0 1.2.0 and higher 1.2.1 1.2.1 and higher 1.2.2 1.2.2 and higher 1.2.3 2.1.0 and higher 1.2.4 2.2.0 and higher 1.2.5 2.2.0 and higher 1.3.0 2.5.0 and higher 1.4.0 2.6.0 and higher 1.4.1 2.7.0 and higher 1.5.0 2.8.0 and higher 1.6.0 2.10.0 and higher ProII 1.0.0 2.10.0 and higer 1.0.1 2.10.0 and higher 1.0.2 2.10.0 and higher ProII BCR 1.0.0 2.10.0 and higher 1.0.1 2.10.0 and higher 1.0.2 2.10.0 and higher P4 AREA 1.0.0 2.4.0 and higher 1.1.0 2.4.0 and higher 1.1.1 2.5.0 and higher 1.1.2 2.6.0 and higher 1.2.0 2.7.0 and higher 1.3.0 2.8.0 and higher 1.4.0 2.10.0 and higher P4 AREA 1.3 1.0.0 2.4.0 and higher 1.1.0 2.4.0 and higher 1.1.1 2.5.0 and higher 1.1.2 2.6.0 and higher 1.2.0 2.7.0 and higher 1.3.0 2.8.0 and higher 1.4.0 2.10.0 and higher P4 BCR 1.0.0 2.3.0 and higher 1.1.0 2.4.0 and higher 1.1.1 2.5.0 and higher 1.1.2 2.6.0 and higher 1.2.0 2.7.0 and higher 1.3.0 2.8.0 and higher 1.4.0 2.10.0 and higher P4 BCR 1.3 1.0.0 2.8.0 and higher 1.1.0 2.10.0 and higher P4 EDGE 1.0.0 2.1.0 and higher 1.0.1 2.1.0 and higher 1.0.2 2.2.0 and higher 1.1.0 2.3.0 and higher 1.1.1 2.4.0 and higher 1.1.2 2.5.0 and higher 1.1.3 2.6.0 and higher 1.2.0 2.7.0 and higher 1.3.0 2.8.0 and higher 1.4.0 2.10.0 and higher P4 EDGE 1.3 1.0.0 2.2.0 and higher 1.0.1 2.3.0 and higher 1.0.2 2.3.0 and higher 1.1.0 2.4.0 and higher 1.1.1 2.5.0 and higher 1.1.2 2.6.0 and higher 1.2.0 2.7.0 and higher 1.3.0 2.8.0 and higher 1.4.0 2.10.0 and higher P4 GEO 1.0.0 2.0.0 and higher 1.0.1 2.0.0 and higher 1.0.2 2.0.2 and higher 1.0.3 2.0.2 and higher 1.1.0 2.1.0 and higher 1.1.1 2.2.0 and higher 1.2.0 2.3.0 and higher 1.2.1 2.4.0 and higher 1.2.2 2.5.0 and higher 1.2.3 2.6.0 and higher 1.3.0 2.7.0 and higher 1.4.0 2.8.0 and higher 1.5.0 2.10.0 and higher P4 GEO 1.3 1.0.0 2.1.0 and higher 1.1.0 2.1.0 and higher 1.1.0 2.3.0 and higher 1.2.0 2.4.0 and higher 1.2.1 2.5.0 and higher 1.2.2 2.6.0 and higher 1.3.0 2.7.0 and higher 1.4.0 2.8.0 and higher 1.5.0 2.10.0 and higher P4 OMNI 1.0.0 2.6.0 and higher 1.0.1 2.6.0 and higher 1.1.0 2.7.0 and higher 1.2.0 2.8.0 and higher 1.3.0 2.10.0 and higher P4 OMNI 1.3 1.0.0 2.9.0 and higher 1.1.0 2.10.0 and higher 1.1.1 2.10.0 and higher P4 OMNI(BCR) 1.0.0 2.8.0 and higher 1.1.0 2.10.0 and higher P4 OMNI(BCR) 1.3 1.0.0 2.9.0 and higher 1.1.0 2.10.0 and higher 1.1.1 2.10.0 and higher ...................................................................................................................... INSTALL PRESENCEPLUS PC SOFTWARE Software requirements: - Pentium II Microprocessor or higher running Windows ME, NT or 2000, or XP. - Requires Administrator rights when run PresencePLUS installation on Windows NT, 2000 or XP. - Hard disk requirements: * Typical installation requires 25 megabytes of free disk space. * Compact installation requires 10 megabytes of free disk space. - Minimum video display resolution setting is 1024-768 at 256 color. - 16 Megabytes of RAM (excluding amount of RAM required by operating system and other applications). - Either an available communication port with PresencePLUS sensor connected to when running application,or Ethernet port. - Winsock 2 installed on the PC. - Internet Explorer 5.0 or higher. Installation instructions: 1. Download the updated PC Software zip file to your local drive. 2. Extract the self-extract setup file "PCSoftwareV2101.exe" from the PC Software zip file you just download . 3. Execute the "PCSoftwareV2101.exe" to install PresencePLUS PC Software version 2.10.1 4. Follow the instructions on the installation screen. 5. Reboot the PC when installation is completed. ............................................................................................. UPDATE PRESENCEPLUS SENSOR FIRMWARE 1. Download the updated Firmware zip file to your local drive. 2. Extract the self-extract setup file "Firmware2006R4C.exe" from the update Firmware zip file you just download . 3. Execute the "Firmware2006R4C.exe" to run Firmware Updater utility Note: Special instructions for updating camera firmware will be shown on the screen when users start the update sensor firmware. Please read and follow screen instruction messagesto avoid a camera configuration failure. ............................................................................................. BANNER CONTACT INFORMATION Address: Banner Engineering Corp., 9714 10th Avenue North, Minneapolis, MN 55441 Phone: (763) 544-3164 Fax: (763) 544-3213 Toll Free: 1-888-3-SENSOR (1-888-373-6767) Email: sensors@bannerengineering.com Website: http://www.bannerengineering.com *************************************************************************** All contents (c) 2006 Banner Engineering Corp.